Synmask Surgical Masks Type IIR

Synmask Type IIR surgical masks are disposable protection masks with a filtration rate of BFE≥98%, according to European standards, which also allow comfortable breathing and speech.

Features:

• Hypoallergenic medical surgical masks 3 layers of protection
• The outer layer is made of waterproof non woven polypropylene spunbond (SBPP)
• The intermediate layer is made of special meltblown (MBPP) with electrostatic treatment, which achieves filtration of even very small particles (BFE≥98%), according to EN 14683:2019+AC
• The inner layer is made of non woven polypropylene spunbond type (SBPP)
• With soft elastic side grips that keep the mask stable, without tiring
• With adaptable and flexible epirenium laminate for better fit and comfort
• It has parallel folds across its width for better fit, more effective filtration and full coverage of the lower face (nose and mouth)
• Odorless
• Skin friendly, do not cause irritation
• Without latex and glass fibres
• Dimensions: 17.5x9.5 cm
• Blue colour
• Disposable
• Packaging display box 5X10 pieces (in reclosable plastic bag)
• With permission from the E.O.F.
• For use by patients and other persons to reduce the risk of spreading infections, especially during an epidemic or pandemic
• Also available in packages of 50 pieces and display box 20X5 pieces

Instructions for Use:

1. Hold the mask in front of the mouth and nose in such a way that the elastics hang to the left and right of the mask.
2. Place the mask over your nose and mouth so that the lamella rests on the top of your nose and slide the elastics behind your ears. The light side should be placed on the inside.
3. Carefully apply the liner to your nose and adjust the mask to achieve a tight fit on your face.

How should we handle the mask safely?
Remember! The correct use of the mask is the key to its effectiveness and the protection of the person wearing it!!!!

Apply hand hygiene by washing your hands or using an alcohol-based antiseptic immediately before wearing the mask and certainly before removing it.
Place the mask so that it completely covers the nose, mouth and chin and that there are no gaps between the mask and the face. If the mask has a metal plate, press it gently around the bridge of the nose. DO NOT touch the mask when you are wearing it because you may transfer the virus to your fingers.
The mask is removed by grasping only the laces first from the bottom and then from the top. If it is a mask with rubber arms, it shall be removed by grasping the rubber arms at the same time.
Do not touch the front of the mask! It is considered contaminated!
The mask shall be removed and discarded when wet.
Discard the mask by always holding it by the laces or rubber arms.
If the mask is multi-purpose, wash it as soon as possible after each use with a common detergent and at a temperature of 60°.

More information on mask use by the public can be found in here.